Chemical spills are accidental or unintentional release of chemicals on the floor or in the air or in the waterways. It can happen at any time and at any workplace, irrespective of the industry. But cleaning a chemical-infused spill is a task. While chemical cleaners are good for surface-level cleaning, a chemical spill kit by Akuna is an ideal solution to absorb, clean, and disinfect the spillage area.
If you are looking for a quality chemical spill kit, you must see if it suits the type of chemical, spill size, and should be easy to use. Because every kit is different from one another. And to prevent choosing the wrong spill kit, exploring these factors in detail is the key.
In this blog, you will discover the essential factors to look for in a premium chemical spill kit. So, keep reading the blog till the end.
Essential Factors to Choose the Right Chemical Spill Kit
Here are all the factors you must keep in mind when deciding the right quality for your chemical spill kit.
1. Suitability With the Chemical Spill:
Buying a chemical spill kit for any type of a chemical is ineffective and sometimes dangerous too. Every chemical reacts differently to the kit’s absorbent materials.
For example, an oil-based kit when used on an acid spill can trigger a spark. So, choosing the right spill kit for the chemicals used in your workplace ensures compliance with WHS regulations and is a prompt solution. Here is what you must know.
2. Comprehensive Contents:
A quality chemical spill kit includes everything you need to contain, absorb, and clean the chemical spill effectively. But you must ensure the following contents.
3. Clear Labelling and Instructions:
In an emergency, you don’t want to figure out if the spill kit is safe to use. Additionally, you won’t have all the time to navigate the website and look for a quick response guide. This is why a chemical spill kit must have a clear and cut-to-precise labelling.
4. Easy to Store and Access:
When choosing spill kits, placing importance on its storage and accessibility as per your site’s layout is the key.
5. Quality of Absorbent Materials:
As mentioned before, low-quality absorbants interfere with the natural properties of a chemical. So, when choosing a chemical spill kit, you must focus on kits with high-quality polypropylene absorbents. Here is why.
6. Compliance with Australian Standards:
Ensure the kit meets relevant WHS regulations and Australian safety standards. Having compliant spill kits is not only a best practice. In fact, it is also a legal requirement to meet your specific industry safety standards.
7. Refill and Replacement Options:
After a spill, you should not worry about buying a whole new kit. Quality spill kits are well-equipped with refill packs. This allows you to restock individual products in the chemical spill kit after using them.
Buying a kit with replacement packs is always an ultimate solution and makes way for a cost-effective usage in the long-term.
8. Customisable:
If your workplace has unique risks, a quality supplier should offer a custom spill kit. For example, you may need extra PPE, mercury-specific absorbents, or ones with a larger capacity
Where to Place Chemical Spill Kits for Maximum Safety?
Even the best chemical spill kit is useless if no one can find it in an emergency. The key focus here is to locate every spill kit in a place of high-risk zones and frequent business operations. Here are the key locations to place your chemical spill kit.
1. Near High-Risk Areas:
The most ideal place to set up a spill kit is the area where you store, use, or transfer chemicals. This includes storage cabinets and warehouses, loading docks, mixing stations, or laboratories or production areas.
2. Along Transit Routes:
If you are moving chemicals around your facility, it is best to position one along the forklift routes, corridors, and near vehicle loading pathways.
3. Near Drains and Environmental Risk Points:
Besides positioning a spill kit in common locations, protecting drains or any area where runoff can contaminate water is crucial. For this reason, stormwater drains, tanks, or any area near water bodies are good locations for keeping a spill kit.
4. On Vehicles or Mobile Equipment:
If your operations involve transporting chemicals, ensure that each vehicle is equipped with a spill kit suitable for the types of chemicals being carried. This is especially critical for logistics, mining, agriculture, and mobile service operations.
Final Words
We hope you found this blog useful. As you see, choosing and setting up a chemical spill kit is beyond a physical and environmental safety measure. It is a proactive strategy to manage risks and comply with the industry-specific safety regulations.
Remember, choosing a right kit adhering to the mentioned standards and placing it in the right location helps you respond within a few minutes of the accidental spill. Consider Akuna Services today for spill control, containment, and barrier-protection products for both land and water needs.
